Results 1 to 3 of 3

Thread: Aimdroix Evo One OCTO configuration Lift to weight Ratio

  1. #1
    Navigator
    Join Date
    Mar 2014
    Posts
    50

    Aimdroix Evo One OCTO configuration Lift to weight Ratio

    The lift to weight ratio on the EVO ONE is tricky when doing an OCTO config. KV 650's with 14" x 4.7 blades with APM 2.6, 30 amp esc's barely got it off the ground. Anyone got a better solution?

  2. #2
    Navigator
    Join Date
    Dec 2014
    Posts
    148
    Do you mean x8 configuration?

    what is your all up weight and 4s....6s?

    also specific motors you are using.

  3. #3
    Aerial Dilettante
    Join Date
    Mar 2015
    Location
    Principality of MONACO
    Posts
    12

    About tio trial...

    Quote Originally Posted by Liam View Post
    The lift to weight ratio on the EVO ONE is tricky when doing an OCTO config. KV 650's with 14" x 4.7 blades with APM 2.6, 30 amp esc's barely got it off the ground. Anyone got a better solution?
    Similar config...
    8X Octo
    (2) x Emax 4-in-1 25 Amp ESC
    (8) x Emax 650 KVA motors
    11 x 4.7 Tiger props
    Wookong M2
    Intended trial Lipo 8000 x 4S x 10c and 10,000 x 4S x 10C

    Hope to trial it within next 2 weeks.
    Suspect might have to use lower KVA motors perhaps 400 / 30 Amp ESC / 14" props.

    This baby WEIGHS quite considerably... Then again, I could be pleasantly surprised. Will advise

Similar Threads

  1. Overlapping Octo
    By Roboforcer X2000 in forum PILOT'S LAB
    Replies: 68
    Last Post: 30th November 2014, 03:41 PM
  2. Cinetank in X8 Octo Configuration
    By staqkoenig in forum FLYINGCINEMA
    Replies: 3
    Last Post: 13th October 2014, 11:33 PM
  3. Replies: 4
    Last Post: 3rd December 2013, 04:10 PM
  4. How to work out thrust to weight ratio?
    By Asomaro in forum RC TECH
    Replies: 14
    Last Post: 16th June 2012, 01:33 AM
  5. Octo checking in.
    By Octo in forum PILOT'S CHECK IN
    Replies: 9
    Last Post: 11th March 2011, 11:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •