RMRC 540 cam, FPV settings?

[ChrisG]

Hello,

I had my 540 cam working fairly well and decided to play to try and get it better, made it worse so hit "Reset"... Shouldn't have done that.

It has defaulted to the Factory settings and not the RMRC settings, BLC Etc is not as it was. Currently the picture is not good for daytime FPV.

Does anyone have working RMRC 540 settings they could post to help me?

Thanks in advance,
Chris.

[Keith]

I did the same thing when I got mine... I got the stock settings from Tim, which I saved for future reference:

RMRC-540
Shutter Auto
BLC On
BLC Area (should be set to the bottom 1/3 of the screen minus the area for the nose of the plane if it's in view)
BLC ratio 25
AGC ON
agc gain 176
White Balance ATW
Function
Camera ID OFF
Mirror OFF
Day/Night AUTO
privacy off
gamma 0.45
language english
Adjust
contrast 89
sharpness 16
cb gain 164
cr gain 168

[FinalFrag]

I've reset mine the same evening I got it... I immediately messed around with the settings. I didn't even know rmrc supplied better settings than stock.

I'll be adjusting mine tonight... Thanks for this keith

[ChrisG]

Keith.... You sir are a Champion for posting that!

Thanking you very much :-)

[Vitamin J]

Damn, makes me happy I haven't touched the settings on my 480 OSD at all. Don't think I ever will either

[TexasAggie]

Thanks for that, Keith!

[Rick~K]

Thanks for posting, I did the same and hit reset and its never been the same.

[durangoflyer]

I like to fly my quad right before sunset and I use this camera, but I did move some of the settings around a while back. I was flying low near a ridge of trees and turned towards the sun (sunset conditions) and the ground got too dark and the camera did not change. I could not judge the trees and had to climb up and turn south so the camera would adjust. I'm going to try these settings and see if it helps.