Japan DVR to Fatshark cable?

[sap_2000]

Hi.
I have a Japan DVR and FatShark Predator goggles.
What I would like is a neat and simple cable that plugs in directly between the two without the need for going through a base station/ splitter ect
.
The AV IN for JDVR is a 2,5mm 4 pin jack
The AV IN/OUT on the FatShark is a 3,5mm 4 pin jack

I have been serching a lot for the cables or plugs needed but can not find any.
Could happily use 2,5 male to 3,5 female and a 3,5 male to 3,5 male cable.

I know I can use the 2,5 jack to RCA for JDVR and the 3,5 to RCA for the FatShark + female to female RCA adapters, but that is a mess of cables and I want something easy like a 2,5 4P male to 3,5 4P male cable of about 1-2 meters or 3-6 feet.

Thanks for you input
(Hoping Tim RMC will make one )

[indycobra]

I would love this as well. Just dont buy this.

http://www.ebay.com/itm/2-5mm-3-5mm-...item4843aee4e3

I think the pin to the fatsharks needs to be longer.

[FPV-JAPAN]

Sorry to miss this guys!

If you have any photos and pinouts of exactly what it is you need I will look into it.
At the least find the connectors so you can knock up your own.

Thanks for you input
(Hoping Tim RMC will make one )

psst... probably best to ask in his part of the forum as this is the FPV-Japan area lol

thanks,

Ren
FPV-Japan

[Twawsi2]

Almost dead thread but here is the pinout for the Fatshark/Immersion Equip. A 2.5 JDVR to a 3.5 FS/IRC jack would be sweet and minimize the cabling in a ground station. Worst case scenario, we make our own. What's each pinout on the JDVR?

[Greg Covey]

Hi Ren,

Perhaps you can post the pinout for your 2.5mm 4-pin jack on the FPV-Japan DVR.

Thanks.

[Greg Covey]

Here is a cable that will connect the stock Japan DVR cable to the Fatshark.





edit by FPV-Japan : this is the FPV-Japan part of the forum - we sell this cable if you need it - thanks

[FPV-JAPAN]

I will look into a hook up cable.
I'll be reselling IRC/Fatshark items very soon.

Excuse the silence but it has been mad month or so since the Autumn holidays in China.

I'll try to post a cable pin out diagram by mid week latest.

thanks,

Ren
FPV-Japan

[wavekatcher]

My JapanDVR will be here tomorrow. I also need a cable to connect my Predator V2's to the JapanDVR. I'm not sure if the RMRC supplied cables will work with the Fatshark cable. Thanks, wavekatcher

[garben]

I would also be Interested in this type of cable. I would like to see it in a 3 to 4 ft. (90 to120 mm) length.

[WitnessOnly]

Hi Ren, hoping this helps I'd be interested also. Cheers

WO