Hi Sander. I have to do some custom wiring which requires making my own connectors for the EzOSD. I need to make up a longer GPS linkage. So far I figured out you use locking MOLEX connectors for most of the linkages, but I am stumped on the little white GPS connectors! Who makes those things? I can order from Newark if you can provide some identifying info. Thanks!
Happy New Year by the way.
Stu (a_marmot)
_________________________________________________
"220, 221, whatever it takes"
Michael Keaton, 1983.
They're Molex Picoblade connectors, that should narrow it down
Purveyor of the FPV secret sauce at ImmersionRC
Found it, Thanks!
_________________________________________________
"220, 221, whatever it takes"
Michael Keaton, 1983.
I wondered about doing this - you up for making two cables?
KF7TRX
It may seem difficult at first, but everything is difficult at first - Myamoto Musashi
"Truly superior pilots are those who use their superior judgment to avoid those situations where they might have to use their superior skills"- Author unknown
Originally Posted by c5galaxy engineer
Sander was 1/2 right. One of the connectors is 5-pin picoblade. The other is Harwin 6 pin, 1mm. I finally have the parts on order (mouser):
5 pin 1.25 spacing: Molex 51021-0500
6 pin 1.00 spacing: Harwin 855-M40-1100600
Sander, is there a reason you use such heavy gauge wire (28) instead of 30 or 32 gauge ribbon?
Scotttu - it might be a while before I get to it, but I can mail you one each of the connectors when they come in. PM me.
_________________________________________________
"220, 221, whatever it takes"
Michael Keaton, 1983.
Posting Permissions
Reply With Quote