FPVLAB

image
Page 5 of 5 FirstFirst ... 345
Results 41 to 46 of 46

Thread: QAV250 - Dust's Build Log

  1. #41
    lol Dude that noise hurts me somewhere deep inside! =O
    Entropy isnít what it used to be.

  2. #42
    Hey Dust, which OSD and Battery are you using?

    Thanks!

  3. #43
    Underground - Cloud Bound Dust's Avatar
    Join Date
    Mar 2012
    Location
    Visiting Earth
    Posts
    2,774
    I am using 3 cell 1300mAh batteries and OSD comes from TBS CORE PnP 25
    Last edited by Dust; 13th February 2014 at 12:35 AM.
    Live Slow - Fly FAST!

    FPV does NOT fly ASAP.

  4. #44
    Underground - Cloud Bound Dust's Avatar
    Join Date
    Mar 2012
    Location
    Visiting Earth
    Posts
    2,774
    Live Slow - Fly FAST!

    FPV does NOT fly ASAP.

  5. #45
    Building a*QAV 250r and QAV x can I just download Inav firmware to Flight controlled and not have to have a GPS antenna and say aDJI nav trying to understand this new to fpv never built drones or flown and building two right now one for me and one for son. Please explain as for my 250r for my son I just ordered a DJI Nav from getfpv so he could have the return home feature which will add weight that I would like to get rid of. If I understand this correctly I would just purchase say a KISS flight controller and download the Inav firmware which is free and I could eliminate the GPS antenna and return the DJI nav system to getfpv? and I could do the same for the QAVX that I am building which is too small to add a gps Flight controller this way the QAVx would have a return to home feature as well with no added weight? or am I way off here someone please help me understand. Thanks very nice QAV by the way

    Kevin
    kevinJLsheridan@gmail.com

    I have also been looking for some help with these QAV builds and have posted below what I could use help with on some FPV forums with no luck so if someone could assist I would surely be grateful!

    New to this sport, never flown or built before, I am sparing no expense in building two drones so I want to get this right. I am currently ordering parts to build my son a QAV 250r and I ordered a QAV x for myself. Below is what I have ordered for parts and I need some help with eCalc configurations to give me some specs on what I am building. I am looking for optimal prop size and pitch with the motor and size I chose along with optimal ESC to handle the motors on a 4s 95c 1300MAH Luminier battery.
    OEM Lumenier QAV X and QAV 250r will have PRO Tmotor F40 2600KV motors, Kiss 30 AMP ESC, 4s 1300 MAH 95c Batteries, 5045/3 Props. I seeking to get out of the 250r to 80-90 MPH and my QAV X to 95-100 MPH if not faster with decent fly time!
    My eCalc configurator shows that I am not even close to desired MPH and fly time for both QAV X and QAV 250r and shows my ESCís, (KISS 30 AMP) are too small and I, need a bigger AMP ESCís, it also shows my Pitch is way off and shows low MPH for both QAVís. (I could be entering the wrong information based on lack of experience which is why I need your help)
    Can someone configure both QAVís for me and let me know the following
    a) What optimal ESC and Prop size/Pitch would be for both build configurations and what prop would you suggest?
    b) What Max Speed will be for both QAVís QAV 250r for my son and QAV X for myself?
    c)What is the fly time for each?
    d) What is your experienced opinion about the Motors ESC, Battery and Prop selection I choose for each the QAV 250r and the QAV X builds. Is there a more efficient, more powerful lighter better combination you would have gone with to make each QAV sick performing drones? if so what would you have chosen? Please email me product info and why you would have gone that route so I can research and change products before I build.
    e) What is it you would do to maximize each QAV with the Motor, ESC, Battery and Prop to get the most out of each QAV.
    You can email me at kevinJLsheridan@gmail.com or text me at 989-359-1026 I will be building these QAVís this week and parts are arriving daily so time is off the essence and I need an experienced FPV Drone builder to help. Best regards,

    KevinJLsheridan@gmail.com

  6. #46
    Holy bringing an old thread back, but funny because I know dustin and actually bought that qav for my first quad a few years ago

Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. Lumenier QAV250 Mini FPV Quadcopter
    By timnilson in forum LUMENIER
    Replies: 5237
    Last Post: 14th March 2017, 06:05 PM
  2. Dust bites the ZII
    By Dust in forum PILOT'S LAB
    Replies: 177
    Last Post: 13th June 2015, 01:57 AM
  3. QAV250!!!
    By supergimp in forum LUMENIER
    Replies: 19
    Last Post: 27th November 2013, 10:33 PM
  4. Graupner bites the dust?
    By Hans in forum OFF-TOPIC
    Replies: 5
    Last Post: 2nd March 2013, 03:23 PM
  5. Cleaning dust from LCD's on aviators
    By Hucker in forum Fat Shark R/C Vision Systems
    Replies: 2
    Last Post: 5th October 2012, 03:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •