Tat might be one of the sexiest things I've seen in a hot minute.
Lou
Tat might be one of the sexiest things I've seen in a hot minute.
Lou
The Tilt mechanics are not finalized yet. That bit is just a working sample that we will change.
Production Manager
Team IRC / FatShark - China
http://www.immersionrc.com
http://www.fatshark.com/
http://www.facebook.com/pages/Immers...68702583220868
That is pretty neat....
Is there a holder that allows quick swap between eg 2400DUO and 5800DUO?
I'll have that too!
LMAO
TBS Discovery FPV Quad (DJI Naza & GPS)
T-motors (MT-2216-11) 900Kv, Graupner 9" Props
Futaba 8FGs & (S.bus) R6208SB
PowerLab6 & Pulse "3S" 45C Lipos
http://www.youtube.com/user/desjardinsj
The connector used is a standard 6-pin mini-din, as used on the Uno5800 as well.
Purveyor of the FPV secret sauce at ImmersionRC
Is everyone just using One lipo to power the receiver & goggles or are you guys powering them individually?
TBS Discovery FPV Quad (DJI Naza & GPS)
T-motors (MT-2216-11) 900Kv, Graupner 9" Props
Futaba 8FGs & (S.bus) R6208SB
PowerLab6 & Pulse "3S" 45C Lipos
http://www.youtube.com/user/desjardinsj
I usually use a 1300mah, or 2200mah 3s for both the vrx and goggles. I've got custom cables set up to go between my IRC VRX and FS Dominators, same with VRX to Japan dvr... This way I don't have large unsightly RCA cables hanging down mid-cable.
I bought a handful of lipo alarms similar to this one:
http://www.hobbyking.com/hobbyking/s...dProduct=18987
I plug one into my VRX/GOGGLE lipo and that gives me the peace of mind I need to fly without sweating the power levels.
Batteries? You don't need no stinking batteries for FPV, as David22 would tell you![]()
Purveyor of the FPV secret sauce at ImmersionRC
the next generation immersion rc gear is going to be powered exclusively on hype alone!