marcin.gala
15th May 2011, 06:06 PM
http://img571.imageshack.us/img571/3470/img2739zj.th.jpg (http://img571.imageshack.us/i/img2739zj.jpg/)
http://img197.imageshack.us/img197/1708/img2740d.th.jpg (http://img197.imageshack.us/i/img2740d.jpg/)
http://img191.imageshack.us/img191/1885/img2734g.th.jpg (http://img191.imageshack.us/i/img2734g.jpg/)
http://img845.imageshack.us/img845/6498/img2732c.th.jpg (http://img845.imageshack.us/i/img2732c.jpg/)
http://img231.imageshack.us/img231/5117/img2735ax.th.jpg (http://img231.imageshack.us/i/img2735ax.jpg/)
http://img808.imageshack.us/img808/2262/img2742v.th.jpg (http://img808.imageshack.us/i/img2742v.jpg/)
http://img815.imageshack.us/img815/4861/img2744m.th.jpg (http://img815.imageshack.us/i/img2744m.jpg/)
http://img853.imageshack.us/img853/6940/img2745y.th.jpg (http://img853.imageshack.us/i/img2745y.jpg/)
http://img706.imageshack.us/img706/6185/img2737y.th.jpg (http://img706.imageshack.us/i/img2737y.jpg/)
http://img560.imageshack.us/img560/5512/img2731e.th.jpg (http://img560.imageshack.us/i/img2731e.jpg/)
http://img717.imageshack.us/img717/9816/img2730o.th.jpg (http://img717.imageshack.us/i/img2730o.jpg/)
http://img833.imageshack.us/img833/9634/img2729y.th.jpg (http://img833.imageshack.us/i/img2729y.jpg/)
During build and already ready for maiden:
Setup....
3542 1100kv 10x6 folded graupner propeller
Turnigy 60Amp plush ESC
Dragon receiver
Dragon OSD with active AT,RTH,Vario and others...
Juice -- 5000mAh 3S Lipo turnigy
Camera 600TVL Sony WDR CCD with OSD plug&play board 12V
Transmitter Lawmate 500mW 1.2Ghz powered with Turnigy Bec 5V
All cables shielded ...taken from USB used for printer..:p
Covered with Laminating Film 1.5mil weight about 40gr/square meter.
Pine wood glued with gorilla polyurethane glue as suport.
Some carbon rods-as less as possible.
Correx covers and weavetape fiber reinforced some weak points on wing.
For now tested on ground...got some modification after pictures taken..like
moving ESC ,LCfilter build in to power up camera and VTX.
GPS lock takes 30seconds ...really happy with this.
Bench test and field tests shows no interference at all ,will see during fly.
Just waiting for good weather with no rain and will do maiden.
Need setup CoG correctly during fly ,trim wing and start working with AT and RTH.
Then some loooong journeys---wish my luck.
http://img197.imageshack.us/img197/1708/img2740d.th.jpg (http://img197.imageshack.us/i/img2740d.jpg/)
http://img191.imageshack.us/img191/1885/img2734g.th.jpg (http://img191.imageshack.us/i/img2734g.jpg/)
http://img845.imageshack.us/img845/6498/img2732c.th.jpg (http://img845.imageshack.us/i/img2732c.jpg/)
http://img231.imageshack.us/img231/5117/img2735ax.th.jpg (http://img231.imageshack.us/i/img2735ax.jpg/)
http://img808.imageshack.us/img808/2262/img2742v.th.jpg (http://img808.imageshack.us/i/img2742v.jpg/)
http://img815.imageshack.us/img815/4861/img2744m.th.jpg (http://img815.imageshack.us/i/img2744m.jpg/)
http://img853.imageshack.us/img853/6940/img2745y.th.jpg (http://img853.imageshack.us/i/img2745y.jpg/)
http://img706.imageshack.us/img706/6185/img2737y.th.jpg (http://img706.imageshack.us/i/img2737y.jpg/)
http://img560.imageshack.us/img560/5512/img2731e.th.jpg (http://img560.imageshack.us/i/img2731e.jpg/)
http://img717.imageshack.us/img717/9816/img2730o.th.jpg (http://img717.imageshack.us/i/img2730o.jpg/)
http://img833.imageshack.us/img833/9634/img2729y.th.jpg (http://img833.imageshack.us/i/img2729y.jpg/)
During build and already ready for maiden:
Setup....
3542 1100kv 10x6 folded graupner propeller
Turnigy 60Amp plush ESC
Dragon receiver
Dragon OSD with active AT,RTH,Vario and others...
Juice -- 5000mAh 3S Lipo turnigy
Camera 600TVL Sony WDR CCD with OSD plug&play board 12V
Transmitter Lawmate 500mW 1.2Ghz powered with Turnigy Bec 5V
All cables shielded ...taken from USB used for printer..:p
Covered with Laminating Film 1.5mil weight about 40gr/square meter.
Pine wood glued with gorilla polyurethane glue as suport.
Some carbon rods-as less as possible.
Correx covers and weavetape fiber reinforced some weak points on wing.
For now tested on ground...got some modification after pictures taken..like
moving ESC ,LCfilter build in to power up camera and VTX.
GPS lock takes 30seconds ...really happy with this.
Bench test and field tests shows no interference at all ,will see during fly.
Just waiting for good weather with no rain and will do maiden.
Need setup CoG correctly during fly ,trim wing and start working with AT and RTH.
Then some loooong journeys---wish my luck.