is this combo ready to go?

[Need4Speed]

if i buy the individual components do they come with the necessary wires to run off my 3s lipos? and do i need a voltage regulator to run any of these?

http://www.readymaderc.com/store/index.php?main_page=product_info&products_id=324 vtx

http://www.readymaderc.com/store/index.php?main_page=product_info&products_id=436 vrx


thanks and please post links if i need anything else

[aeryck]

Theyre both 12v devices so running off 3s lipo shouldnt require a regulator. As for cables, you may need to make a solution depending on what youre hooking it u to.

[ReadyMadeRC]

Typically people purchase packages that come with additional cables for hooking to cameras and your battery. You don't need a voltage regulator if you are running off of a 3s battery, but you may need adapter cables depending on what you are trying to do.

[Need4Speed]

http://www.readymaderc.com/store/ind...roducts_id=324 (http://www.readymaderc.com/store/index.php?main_page=product_info&products_id=324) vtx

http://www.readymaderc.com/store/ind...roducts_id=436 (http://www.readymaderc.com/store/index.php?main_page=product_info&products_id=436) vrx

hooking it to this camera

http://www.securitycamera2000.com/products/600TVL-High-Resolution-SONY-HAD-CCD-Color-Board-Camera.html

i have lipo's with the traxxas high current plugs and the standard type ballancer tabs. do i need to make plugs for this system?

could you recomend a wider angle lens for the camera?

[ReadyMadeRC]

3.6 is a comfortable lens for these cameras, but 2.8 will give you a wider view:
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_62_63&products_id=194

Assuming your batteries are 3s and use JST-XH style plugs, you need these cables to get up an running with a "plug in" solution:
2x: http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_68&products_id=500
If you're using the same battery to power your vehicle too, you need one of these to go after the plug above:
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_68&products_id=533
Assuming the connector on that camera is the same size (they aren't always), you need this:
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_67&products_id=133
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_67&products_id=282
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_67&products_id=357

[Need4Speed]

3.6 is a comfortable lens for these cameras, but 2.8 will give you a wider view:
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_62_63&products_id=194

Assuming your batteries are 3s and use JST-XH style plugs, you need these cables to get up an running with a "plug in" solution:
2x: http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_68&products_id=500
If you're using the same battery to power your vehicle too, you need one of these to go after the plug above:
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_68&products_id=533
Assuming the connector on that camera is the same size (they aren't always), you need this:
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_67&products_id=133
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_67&products_id=282
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_67&products_id=357

my batteries are 3s turnigy's with the standard balance plugs, which i beleive are the JST-HX's you're talking about. i wil be running a seperate battery for the video system. what plug do i need to connect a lipo to the lawmate rx?

when will the lawmate receivers be back in stock?

[ReadyMadeRC]

You need this to hook from the cable I linked to above to the receiver:
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_66_68&products_id=356
I've had an order open with Lawmate for a few weeks. They are horrible about answering emails. I've asked if they have a shipping estimate and they haven't answered. Their original quote said 2-4 weeks after I paid, and we're almost at 4 weeks, so hopefully they'll be shipping to me any day, or they already shipped.